BGS 2019-2020 no1

201/2
Tube Bending Pliers | 4.75 + 6 mm
• suitable for 4.75 and 6 mm tubes
Item #
8229
Tube Bending Tool | for copper pipes | 4 - 10 mm
• for bending 4 - 6 - 8 - 10 mm copper and aluminium pipes
• with two replaceable bending wheels, each providing 180° for 4/6 and
8/10 mm
• maximum bending radius approx. 18 mm
Item #
3061
Tube Bending Pliers | "4-in-1"
• 1 bending half-roll Ø 35 mm for 4.8 mm pipes (3/16")
• 1 bending half-roll Ø 28 mm for 6.4 mm pipes (1/4")
• 1 bending half-roll Ø 28 mm for 8.0 mm pipes (5/16")
• 1 bending half-roll Ø 25 mm for 9.5 mm pipes (3/8")
• allows bending of pipes up to 180°
• suitable for aluminium, copper and steel pipes
• rolls made of aluminium, basic unit made of steel, dipped coated grip
Brake
Item #
8718
Air Brake Bleeding and Oil Extraction Unit - pneumatic and manual
• allows a clean oil change by suction
• usable for engine, transmission, rear axle oil and other non-corrosive
liquids
• suction hose 9.8 - 8.0 - 6.7 - 4.5 mm Ø for extraction by suction through
the dipstick tube
• 10 l container with base ensures stability to accommodate large
amounts of oil
• suitable for oil extraction on all Smart cars but also for all other vehicles
for which an oil change is to be performed without using a car lift
• with a special silicone brake breather hose with a valve for one-hand
operation
• easy brake bleeding on brake systems of all types of vehicles
• the built-in hand vacuum pump allows brake bleeding even without
compressed air
Item #
3155
467