BGS 2019-2020 no1

201/20
Ratcheting Tap and Die Holder Set | 6 pcs.
• comfortable working with 10 mm (3/8") drive ratchet handle
• 72 teeth t-handle ratchet
• 2 tap holders, for sizes: M3 - M8 and M6 - M12
• 2 die holders for max. diameters of 20 mm - 25 mm
• extended range of application by using optional extension bar
• including double open end wrench
Thread Cutters / Hand Tools
Item # Description
1984 Ratcheting Tap and Die Holder Set | 6 pcs.
1984-1 Ratchet with T-Handle | external square 10 mm (3/8")
Screwpitch Gauges
Item # Description
3067 Screwpitch Gauge | 24 Blades | Metric 0.25 - 6.00 mm
3068 Screwpitch Gauge | 28 Blades | whitworth 4G - 62G
3069 Twin Screwpitch Gauge, 52 Blades | Metric 0.25 - 6.0 mm, Whitworth
4G - 62G
Face Pin Wrench Set | adjustable | Ø 2.5 - 9 mm
• face pin wrench, length: 245 mm
• carbon steel, hardened, zinc-plated
• with 8 exchangeable pins - only one wrench needed for all standard pins
• pin diameters: 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 mm
• max. opening width 102 mm
Item # Description
1464 Face Pin Wrench Set | adjustable | Ø 2.5 - 9 mm
1464-4 Pin Pair | Ø 4 mm | for BGS 1464
1464-5 Pin Pair | Ø 5 mm | for BGS 1464
Hook Wrench with flexible Jaw
• for slotted/grooved nuts (DIN 1804) and for adjusting stirring head
bearings
• jaw width: 35 - 60 mm
• length: 175 mm
• material: special steel
• surface finish: burnished
Item #
1226
Face Pin Wrench | adjustable | 180 mm
• range: 11 mm and up
• arm length 172 mm (center joint - center pin)
• offset front end 11 mm
• pin Ø 4 mm
• riveted pins
Item #
1463
250