BGS 2019-2020 no1

201/20
Tap and Die Set | M3 - M12 | 44 pcs.
Thread Cutters
• 7 tap sizes (DIN 352), each size includes starter, plug and bottoming tap
M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12
x 1.75
• 7 dies (DIN 223)
M3 x 0.5 (Ø 20 x 5 mm) - M4 x 0.7 (Ø 20 x 5 mm) - M5 x 0.8 (Ø 20 x 7
mm) - M6 x 1.0 (Ø 20 x 7 mm) - M8 x 1.25 (Ø 25 x 9 mm) - M10 x 1.5 (Ø
30 x 11 mm) - M12 x 1.75 (Ø 38 x 14 mm)
• 5 die holders: No. 1 - 2 - 3 - 4 - 5
#1 = M3 - M4
#2 = M5 - M6
#3 = M8
#4 = M10
#5 = M12
• 2 tap wrenches (DIN 1814): No. 1 - 2
#1 = M1 - M10
#2 = M4 - M12
• 7 HSS drills (DIN 338) 2.5 - 3.3 - 4.2 - 5 - 6 - 8 - 8.5 - 10.2 mm
• 1 screwpitch gauge
• 1 screwdriver
• material: HSS g steel
• in a metal case
Item #
1927
Tap and Die Set | M3 - M12 | 32 pcs.
• 7 tap sets DIN 352
• 7 dies DIN 223
25 x 9 mm: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10
x 1.5 - M12 x 1.75
• 1 die holder 25 x 9 mm
• 1 tap wrench (DIN 1814) no. 1
• 1 screwpitch gauge
• 1 screwdriver
• material: HSS g steel
• in a metal case
Item #
1925
246