Catalogue 2020 - Canada

Kronenflex® large cut-off wheels
Applications guide
Which cut-off wheel is used with
which machine?
Large cut-off wheels for stationary machines and large cut-off
wheels for handheld machines are designed differently and their
build is optimised for the respective machine type. For safety
reasons large cut-off wheels for stationary machines may never be
used with hand held machines.
The bore diameter of a large cut-off wheel does not indicate if it
is a wheel that can be used with a stationary machine or if it is a
wheel that can be used with a hand held machine.
A binding overview regarding which Klingspor wheel type is to be
used with which machine type is provided in the table below.
Cut-off wheels
Safety
Type Ø [“]
Thickness
[“] Bore Ø [“] Machines
Max. operating
speed Application type (EN12413)
A 24 EXTRA 12 9/64 20 mm general handheld machines (petrol, electric, 80 m/s
C 24 EXTRA 12 9/64 20 mm high frequency)
80 m/s
freehand cutting
A 330 EXTRA 14 3/32 1 transportable bench chop saws, chop saws 80 m/s stationary guided cutting 3 KW
14 9/64 1 / 1/4 stationary saws / cutters
100 m/s stationary guided cutting >3 KW
16 3/16 1 / 1/4 / 1-1/2 100 m/s >3 KW
A 24 N SUPRA 14 9/64 1 100 m/s >3 KW
A 24 R/06 SUPRA 16 5/32 1 100 m/s >5 KW
A 924 R SPECIAL
12 9/64 20 mm / 1
100 m/s
14 5/32 20 mm / 1 general handheld machines (petrol, electric, 100 m/s
A 24 R SPECIAL
12 9/64 20 mm / 1 high frequency)
80 m/s
14 5/32 20 mm / 1 80 m/s
freehand cutting
12 9/64
general handheld machines (petrol, electric,
100 m/s
T 24 AX SPECIAL 14 5/32 1 high frequency, hydraulic) with a clamping 100 m/s stationary guided cutting
16 3/16 1
device
100 m/s
C 24 RA SPECIAL
12 9/64 20 mm general handheld machines, joint cutters 80 m/s
14 5/32 20 mm / 1 (petrol, electric, high frequency)
80 m/s
freehand cutting
A 930 N SPECIAL
12 3/32 1
80 m/s