22.02.2022 Views

WINTER2022_SSCWN_1-68-3

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Mud on the tires, money<br />

in the pocket<br />

TRICKS OF THE<br />

Wondering if there is any interest in washing your own semi/boat/RV? Want to start a self serve truck wash<br />

but not sure if there’s enough interest. Found a great potential spot across from a truck stop. Maybe everyone<br />

would prefer someone else do it or just drive thru an automatic. CBISHOP<br />

Those who have truck height bays at their self serves<br />

know that the taller vehicles/equipment trailers<br />

bring a ton of revenue.<br />

However, even if you can take all kinds of vehicles<br />

at a SS idk if it would financially make sense to<br />

do a new builder. MC3033<br />

The idea was since it’s right off a busy hwy (talking<br />

service road) and next to a truck stop the trucks coming<br />

in would be good and would also cater to RVs.<br />

There’s just nothing else out here except in the<br />

towns and nothing tall enough. I have 2 truck stops<br />

within 5 miles of each other as well.<br />

The biggest question is would truck drivers prefer<br />

SS or prefer drive thru or someone like blue eagle to<br />

do it for them. CBISHOP<br />

I wouldn’t expect much revenue from RVs. They’re<br />

almost all retirees on a fixed income. I know this<br />

from years of doing state safety inspections. I would<br />

inspect one probably every two weeks, and there<br />

would usually be a running light not working. I<br />

would only charge $1.50 to replace the bulb, which<br />

half the time was just corrosion on the bulb base or<br />

a loose ground wire, and not once in five years did<br />

someone opt to have me do it. It probably cost them<br />

more in gas to go home, fix it, and come back for the<br />

re-inspection.<br />

Trucks will spend a lot, especially dump trucks,<br />

but you have to have the right location. There needs<br />

to be some sort of dirt/gravel/clay yard permanently<br />

nearby. Construction doesn’t help because it will<br />

eventually end. And dump trucks will make a huge<br />

mess. The bay will have to be cleaned after almost<br />

every truck, or it will build up so fast they won’t<br />

even be able to get in. My late cousin used to have<br />

a 4-bay truck wash, even had one of the first credit<br />

card systems. He said they could spend between<br />

$50 and $100 washing a truck. This was in the mid-<br />

90s when most self-serves were still $1 for at least<br />

4 minutes. MEP001<br />

I could make good $ off a pet wash where I am located,<br />

but I have no interest in cleaning up after people<br />

and their pets.<br />

Same with a truck wash for me. I have a 2 acre<br />

lot, and near a lot of industry. I would not want to<br />

clean up after trucks, and the junk they leave behind.<br />

You also need to have the space and your parking<br />

lot etc, need to be made to handle 50,000# plus<br />

vehicles.<br />

I also believe owner/operators would be the only<br />

ones interested in washing their trucks. Corporate<br />

drivers won’t spend their time or money to wash.<br />

But again, that is what I think. I would do some research.<br />

Maybe start by asking some of the drivers<br />

at the stops how they get washed and who pays?<br />

TOMS PTCARWASH<br />

• Concrete Form System<br />

• Water and corrosion-proof_ ....,<br />

• Panels will not rust, rot or flake<br />

• Custom cut panel kits to 20 feet<br />

• Cleans easily - low maintenance<br />

• Brightens the interior of any building<br />

• Fewer seams - 2 foot wide panels<br />

• Resists mold, mildew, bacteria growth<br />

• 6" and 8" thick stay-in-place concrete form<br />

• Available in a bright white, high gloss, hard surface<br />

• Low maintenance, easy-to-clean, with water/mild cleaner<br />

• Protective film on both sides keeps panels clean during construction<br />

• ICC-ES Evaluation Report ERS-4250<br />

(!I Manufacturing American-Made PVC Panels for 28 Years!<br />

A- ..<br />

Poly Board" Panels<br />

Pl300- 12" wide<br />

Pl600 - 16" wide<br />

Suspended Ceiling<br />

and Doors<br />

also Available<br />

· !'.!'1. • Visit our web site or give us a call to learn more about this great new<br />

l!I. product and our Pl300 - 12", Pl600 - 16" and *P2400 - 24" wide liner panels.<br />

Ask for Extrutech - Get The Best Surface, Shine, and Strength in the Industry!<br />

m EXTRUTECH Phone: 888-818-0118 PLASTICS, INC. LTJ<br />

r.i, I<br />

www.e p i p laSlics.com <br />

"1SO90012015QMS C,rt,fied<br />

• Membership Plans<br />

• Loyalty Programs<br />

• Fleet Programs<br />

• Automated Marketing<br />

• Text Marketing<br />

• And More!<br />

More than an App,<br />

It’s a tool to help<br />

grow your business<br />

Touch4Wash.com<br />

Or give us a call 612-787-7278<br />

WINTER 2022 • 49

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!