Industry Catalog

STRUB Spindle Fluid XLI++ Concentrate
Coolant concentrate for engine spindle systems
DESCRIPTION
STRUB Spindle Fluid XLI ++ Concentrate is a
corrosion protection concentrate for spindle and
cooling systems. The passivators contained in
the product provide long-term protection against
corrosion for a wide range of materials. In particular,
electrochemical reactions are prevented and
materials such as aluminum, cast iron, nonferrous
and ferrous metals are protected. Not suitable for
galvanized, zinc-plated surfaces. In high-speed,
highperformance motor spindles, the drive shafts
can be cooled trouble-free with STRUB Spindle
Fluid XLI ++ Concentrate. The spindle fluid can also
be used in all other, less stressed systems.
SPECIFICATIONS
Various approvals including STEP-TEC AG
APPLICATION
For the preparation of STRUB Spindle Fluid XLI++
Concentrate only tap/drinking water may be used
which does not exceed the following limits. Water
hardness: 20°dH, chloride 100 ppm, sulfate 100
ppm. If the listed water values are exceeded, STRUB
Spindle Fluid XLI ++ Ready must be used. STRUB
Spindle Fluid XLI ++ Concentrate is mixed as follows;
55 parts water and 45 parts STRUB Spindle
Fluid XLI ++ Concentrate. Optimal conditions of use
are temperature-stabilized cooling units to extend
the service life of the coolant.
ART.-NO. ARTICLE PACKAGE
32029 Spindle Fluid XLI++ Concentrate
5l / 10l / 20l / 60l / 200l
2023
49