Industry Catalog

STRUB Stabillo Cut Extreme EP SW
Universal, biostatic, high-pressure cooling lubricant
DESCRIPTION
STRUB Stabillo Cut Extreme EP SW is an extreme
pressure metalworking fluid. Excellent rinsing-cleaning
effect (clean machines) as well as a very good
foaming behavior even with soft water, show the
strength of this cooling lubricant. Thanks to the
fine droplet size, consumption (drag-out losses due
to chips, parts and tools) is massively reduced. In
addition to the low post-dosing, STRUB Stabillo
Cut Extreme EP SW is biostatic, i.e., very good
resistance to bacteria and fungi. Free of secondary
amines, formaldehyde or formaldehyde releasers,
nitrite, nitrite releasers, PCB, PCT, PTBB, etc. and
complies with TRGS 611.
APPLICATION
Universal use such as milling, turning, drilling,
tapping and sawing on cast iron, various steels and
aluminum 6000 and 7000 series. (No staining).
Copper corrosion test 40°C 3h 1b (pass)
FACTOR REFRACTOMETER READING 1.2
ART.-NO. ARTICLE PACKAGE
31735 Stabillo Cut Extreme EP SW
5l / 10l / 20l / 60l / 200l / 1000l
STRUB Stabillo Cut Extreme O
Universal, biostatic high-tech cooling lubricant
DESCRIPTION
Water-emulsifiable, mineral oil-based, bacteriaresistant
cooling lubricant with very universal character.
STRUB Stabillo Cut Extreme O does not stick
and, thanks to the small emulsion droplet size, has a
high rinsing-cleaning power with excellent dripping
capacity. The product has a very low consumption,
even in cast machining (lower post-dosing ~ 1 % to
be able to keep the concentration) and is therefore
very economical.
APPLICATION
Universeller Einsatz wie Fräsen, Drehen, Bohren,
Gewindeschneiden und Sägen auf Guss, diversen
Stählen und Alu 6000- und 7000-Serie. (Keine
Fleckenbildung). Kupferkorrosionstest 40°C 3Std.
1b (pass)
FACTOR REFRACTOMETER READING 1.2
ART.-NO. ARTICLE PACKAGE
31936 Stabillo Cut Extreme O
5l / 10l / 20l / 60l / 200l / 1000l
90 2023