WIN woodworking INTERNATIONAL 2022/3

Nuremberg, Germany
21–24.3.2018
European Trade Fair for Machine Technology,
Equipment and Supplies for the Woodworking Crafts
Numerous top innovations
Aigner Werkzeuge GmbH from Taufkirchen in Upper Austria presented its top innovations
in the field of cutting tools for wood and plastics processing at HOLZ-HANDWERK:
Grooving cutter Konstantin ® Mini FinishCut
C248&C249 with interchangeable DIA blades
The family of Konstantin ® Mini DIA grooving
cutters has been successfully extended by
the FinishCut model series C248 & C249. A superlative
DIA groove shank cutter type with outstanding
milling properties for machining almost
all common board material types!
A tear-free milling pattern, combined with
fast feed rates, enables FinishCut users to easily
machine materials such as multiplex, coated
and veneered particleboard, as well as MDF and
even furniture solid wood panels. Two cutter
types with different numbers of teeth are available
for different performance ranges.
Starting with the C248 for rather slower
to medium feed ranges and following with the
C249 which is an ideally suited grooving cutter
for CNC professionals with high performance requirements!
Konstantin ® Mini users can easily
change the cutting edges themselves in a DIY
process with a torque wrench. This eliminates
long waiting times for service work and cost-intensive
new purchases for replacement tools!
DIA grooving cutters C442 and C443 for use
on suction turbines for nesting machines
Of course, Aigner does not neglect the tool
program for the ever increasing number of nesting
machining centers in woodworking. Here,
with the C442 and the C443, two new DIA nesting
cutter types are available for different panel
thicknesses and power ranges. Cleverly solved,
these variants function excellently in conjunction
with common suction turbines and in this
combination ensure a good chip flow in the
direction of the extraction system. Specially
matched cutting geometries enable a high cutting
quality on the narrow surfaces and economical
milling in everyday production.
Face milling cutter Konstantin® C181 with
interchangeable DIA blades
In line with the theme of nesting, Aigner is
also presenting its new C181 milling cutter in
Konstantin ® design with DIA interchangeable
cutting edges. In the standard version, the milling
cutter is available in diameters of 80 and
120 mm with 25 mm h6 shank. Whether the
milling tool is equipped with three or six teeth is
easily decided by the user on site. The face milling
cutter can be converted for different feeds
or material types with the help of blind knives,
this always ensures the right operating conditions
and perfect milling quality!
PM-Shaped recessed grip router bit for CNC
C557 – 4
The successful recessed grip router bit series
has been expanded to include the C557 – 4. This
smart interchangeable-plate profile end mill allows
up to seven different handle profiles to be
milled on the CNC! With this tool, trendy handle
recesses can be milled into solid wood furniture
fronts in impressive milling quality. A very simple
exchange of the profile cutting edge allows
a quick changeover to different profiles.
Konstantin ® Mini Radius Profile Cutters
C560 – 1 and C560 – 2
A special coup has been achieved with the
new router types C560 – 1 and the C560 – 2. For
the first time, a DIA round profile cutter and a
DIA round profile grooving cutter equipped with
the Konstantin ® Mini interchangeable blade system
are available for Holzher edge banding machines.
Revolutionary; here the profile cutting
holz-handwerk.de
Information
NürnbergMesse GmbH
T +49 911 86 06-49 29
visitorservice@nuernbergmesse.de
Aigner Werkzeuge GmbH –
a company with simple beginnings
Parallel to
Aigner Werkzeuge has been the second largest
Austrian manufacturer of woodworking tools for
over 40 years. The success of the company is not
only in the development and production of high
quality cutting tools, but can also be seen in the
industry-relevant customer solutions that we can
offer for almost all company sizes. The focus lies
on the quality, longevity and sustainability of our
products.
HH18_121x305_INT_WIN_woodworking_international_BES_GUT.indd 1 15.01.18 14:45
In addition, Aigner does an excellent job in the
area of training; the company employs almost exclusively
self-trained, highly qualified specialists.
The distribution of our products is carried out in
the immediate vicinity by our own service staff
and Europe-wide or almost worldwide by now,
by specialized dealers who are looked after and
regularly trained by our experienced field service
team.
Aigner currently employs over 80 people in the region
of Upper Austria and is currently expanding
its production areas with a large new building. As
managing director, DI Josef Hochholzer is responsible
for the successful steering and strategic orientation
of the company. With a regulated succession
and very good capacity utilization, Aigner
looks very positively into the future, even in somewhat
more difficult times!
edges can be exchanged by the user with different
radii 1.0/1.3/2.0/2.5/3.0 mm and this with a
constant trailing edge! For the user, this means
in clear text, no new purchase of many different
radius cutter sets, but by simply changing
the profile cutting edges on site, any radii can
be created with the C560 – 1 and C560 – 2. If the
DIA radius profile cutters have to be changed at
the end of their service life, the machine does
not have to be readjusted a second time. The
two cutter types are used on the corner and longitudinal
milling units on edgebanders of various
sizes. Soon, standardized cutter types will
also be available for other common manufacturers.
Of course, this is already possible on
request!
www.aigner-werkzeuge.at
No. 3 • August 2022
29