id-fpc-global-guide_3_manual

3.4.3 Connection of controller analog inputs
Standard connection of three resistive sensors to analog inputs.
Mixed connection of controller analog inputs:
AI1 – binary input
AI2 – three state input
AI3 – analog resistive input
Two inputs for Battery voltage measuring
The voltage range is 0.0 – 40.0 V
Four voltage inputs connection
The voltage range is 0.000 – 10.000 V
Analog inputs are designed for resistive sensors with resistance in range of 0 Ω to 2.4 kΩ.
To ensure a proper function use shielded cables, especially for length over >3m.
ID-Lite FPC 1.6.0 Global Guide 22