id-fpc-global-guide_3_manual

4.3 Operator Interface
4.3.1 Control panel
Pushbuttons and LEDs
Number Button Description
MODE→
←MODE
HORN RESET
FAULT RESET
START
STOP
GREEN LED
RED LED
PAGE
↑
↓
ENTER
Cyclic forward selection the engine operation mode (OFF -> TEST -> AUT)
Cyclic backward selection the engine operation mode (AUT -> TEST ->OFF)
Deactivates the HORN
Acknowledges faults and alarms
Start of the engine
Stop of the engine
Engine running
Engine fail
Cyclic selection of the display mode(MEASUREMENT->ADJUSTEMENT)
Select the set point, select the screen or increase set point value
Select the set point, select the screen or decrease set point value
Confirm set point value
ID-Lite FPC 1.6.0 Global Guide 34