id-fpc-global-guide_3_manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.4 MEASUREMENT screens description
4.4.1 Main measure screen
Number
Description
Operation mode of the engine
Indication: L = Access lock, ! = active Alarm
Status of the engine
Timer - events counting time (e.g. prestart, cooling, etc.)
Engine RPM
4.4.2 Controller Analog inputs screen 1
Oil pressure
Engine temperature
Fuel level
Battery voltage
(AI1 bargraph with protection limits indication)
(AI2 bargraph with protection limits indication)
(AI3 bargraph with protection limits indication)
(power supply bargraph with protection limits indication)
4.4.3 Controller Analog inputs screen 2
Battery A voltage
Battery B voltage
(Battery A voltage bargraph with protection limits indication)
(Battery B voltage bargraph with protection limits indication)
4.4.4 AnInIOM Analog inputs screen
AnInIOM1
AnInIOM2
AnInIOM3
AnInIOM4
(AI1 bargraph with protection limits indication)
(AI2 bargraph with protection limits indication)
(AI3 bargraph with protection limits indication)
(AI3 bargraph with protection limits indication)
Note: This screen is shown/hidden depending on whether the IL-NT-AIO is configured or not.
4.4.5 Controller Binary inputs
BI1 to BI7
ID-Lite FPC 1.6.0 Global Guide 38