id-fpc-global-guide_3_manual

5 Remote Communication
Note: Refer to InteliCommunication guide for all additional information.
5.1 Internet connection 50
5.2 Recommended ISDN modem 50
5.3 Recommended GSM modem 50
5.4 Mobile SIM card setting 51
6 back to Table of contents
5.1 Internet connection
CONTROLLER controllers can be monitored from LiteEdit 3.0 over the Internet using Internet Bridge (IG-IB)
connected to the controller RS232 port. See demo example in explorer at address http://195.122.193.152/. For
more details refer to IB-Lite Reference Guide.
5.2 Recommended ISDN modem
Askey TAS-200E
ASUScom TA-220ST
Develo Microlink ISDN i
5.3 Recommended GSM modem
Siemens M20, TC35, TC35i, ES75, MC39
Wavecom M1200/WMOD2
Wavecom - Maestro 20, dual 900/1800MHz.
Wavecom – Fastrack M1306B, dual 900/1800 MHz (Fastrack M1206B is NOT recommended)
FALCOM A2D, dual 900/1800MHz.
5.3.1 GSM Modem setup
Prior to start work with GSM modem run following program for GSM proper setup. Program writes all the
necessary AT commands to configure the GSM modem properly for use with CONTROLLER.
This program runs independent on LiteEdit:
Start MSWindows-Start-Program files - LiteEdit –Gm_setup.exe.
Select COM port
Select iG-CU (=IS-CU) or iG-MU unit
Press Setup button
Follow commands in GSM Modem Setup window
Typical real baud rate for GSM data communication is 80 to 90 Bps.
ID-Lite FPC 1.6.0 Global Guide 50