Planning Guide AC Servomotors 1FT5 - Siemens Automation and ...
Planning Guide AC Servomotors 1FT5 - Siemens Automation and ...
Planning Guide AC Servomotors 1FT5 - Siemens Automation and ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
05.03<br />
© <strong>Siemens</strong> AG 2003 All rights reserved<br />
<strong>AC</strong> <strong>Servomotors</strong> <strong>1FT5</strong> (PFT5) – 05.03 Edition<br />
Motor Description<br />
1.2 Order designation<br />
Ordering example<br />
When ordering a <strong>1FT5</strong> <strong>AC</strong> servomotor with options, it is necessary to specify the<br />
ordering code ”–Z” <strong>and</strong> in addition the short designation. For core types, the last<br />
ordering block is appropriately supplemented.<br />
The following is required:<br />
An <strong>AC</strong> servomotor<br />
� To connect to a SIMODRIVE 611 drive converter with a 600 V DC link voltage<br />
� Rated voltage, 3000 RPM<br />
� Stall torque, 33 Nm at ∆T = 100 K<br />
� Type of construction: IM B5 (IM V1, IM V3)<br />
� Connection type: Power connectors for motors/brake, signal connector for<br />
the encoder system<br />
� With integrated holding brake<br />
� With mounted ROD 426 pulse encoder (1000 pulses/revolution)<br />
The following should be ordered: Order No.:<br />
<strong>1FT5</strong> <strong>AC</strong> servomtoor <strong>1FT5</strong>102–0AF71–1–Z<br />
nN = 3000 RPM,<br />
M0 = 33 Nm at ∆T = 100 K<br />
Special version: Codes<br />
� Integrated holding brake G45<br />
� Mounted ROD 426 pulse encoder H22<br />
Order No., core type: <strong>1FT5</strong>102–1AF71–1EB0<br />
(the same motor but only prepared for mounting<br />
an encoder)<br />
<strong>1FT5</strong>/1-17