Planning Guide AC Servomotors 1FT5 - Siemens Automation and ...

More documents

Recommendations

Info

Motor Description 1.3 Technical version, 1FT5 motors 1.3 Technical version, 1FT5 motors Table 1-1 Features of 1FT5 standard motors Technical features Version Motor type Permanent–magnet synchronous AC servomotor Type of construction (acc. to EN 60034–7; IEC 60034–7) Degree of protection (acc. to EN 60034–5; IEC 60034–5) Cooling (acc. to EN 60034–6; IEC 60034–6) Thermal motor protection (acc. to IEC and EN 60034–11) Shaft end (acc. to DIN 748–3; IEC 60072–1) 1FT5/1-18 IM B5 (IM V1, IM V3); option, refer to Table 1-2 IP 64, option, refer to Table 1-2 Non–ventilated; options, refer to Table 1-2 PTC in the stator winding Cylindrical; with keyway and with key; tolerance zone k6; Option, refer to Table 1-2 Rating plate A second rating plate is provided for core types Radial eccentricity, concentricity and axial eccentricity (acc. to DIN 42955; IEC 60072–1) Vibration severity (acc. to EN 60034–14; IEC 60034–14) Balancing (acc. to IEC and EN 60034–14) Tolerance N (normal); options, refer to Table 1-2 Stage N (normal); options, refer to Table 1-2 Full–key balancing Bearings Deep–groove ball bearings with (permanent lubrication) bearing lifetime > 20000 h Locating bearing on the drive end Stator winding insulation (acc. to EN 60034–1; IEC 60034–1) Installation altitude (acc. to IEC and EN 60034–1) Magnetic materials Rare earth materials Temperature rise class F for a winding temperature rise of ∆T = 100 K for an ambient temperature of 40 °C. For ambient temperatures > 40 °C, the power must be reduced (de–rated) (refer to the documentation ”General Section”). � 1000 m above sea level, otherwise power de–rating (VDE0530) 2000 m factor 0.94 2500 m factor 0.9 (refer to the documentation ”General Section”) Electrical connection Connector for power and encoder signals � Connector outlet direction can be selected Encoder system Integrated analog tachometer � Speed sensing Magnetic elements or Hall sensors � Rotor position sensing 05.03 © Siemens AG 2003 All rights reserved AC Servomotors 1FT5 (PFT5) – 05.03 Edition
05.03 Options Table 1-2 Options Technical feature Version Degree of protection (acc. to EN 60034–5; IEC 60034–5) IP 67, IP 68 (only non–ventilated) Cooling Forced cooling Shaft end (according to DIN 748–3; IEC 60072–1) Radial eccentricity, concentricity, axial eccentricity (DIN 42955; IEC 60072–1) Vibration severity (acc. to EN 60034–14; IEC 60034–14) © Siemens AG 2003 All rights reserved AC Servomotors 1FT5 (PFT5) – 05.03 Edition Motor Description 1.3 Technical version, 1FT5 motors Cylindrical without keyway (DIN 6885); tolerance zone k6 Tolerance R Stage R Mounted/integrated components � Fail–safe holding brake; supply voltage 24V�10% (acc. to DIN 0580 7/79) � Working brake (shaft height 71, shaft height 100 and shaft height 132) � Integrated pulse encoder (shaft height 63 to shaft height 132) � Mounted pulse encoder � Prepared for mounting an encoder � Mounted planetary gearbox 1FT5/1-19
Page 1: Planning Guide 05/2003 Edition simo
Page 4 and 5: 3ls SIMODRIVE ® Documentation Prin
Page 6 and 7: 1 Kapitel Hotline vi If you have an
Page 8 and 9: Foreword Danger and warning informa
Page 10 and 11: x Foreword ESDS information and ins
Page 12 and 13: Table of Contents 1FT5 1FT5-12 Spac
Page 14 and 15: Motor Description 1.2 Order designa
Page 16 and 17: Motor Description 1.2 Order designa
Page 20 and 21: Motor Description 1.3 Technical ver
Page 22 and 23: Motor Description 1.3 Technical ver
Page 24 and 25: Motor Description 1.4 Functions and
Page 30 and 31: Motor Description 1.5 Cooling 1) Po
Page 32 and 33: Motor Description 1.6 Electrical co
Page 34 and 35: Motor Description 1.7 Drive-out cou
Page 36 and 37: Technical Data and Characteristics
Page 68 and 69:
Technical Data and Characteristics
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Motor Components (Options) 3.1 Ther
Page 80 and 81:
Motor Components (Options) 3.2 Enco
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Motor Components (Options) 3.4 Work
Page 90 and 91:
Motor Components (Options) 3.5 Gear
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Dimension Drawings Short type of co
Page 98 and 99:
Dimension Drawings 2 3 4 5 6 7 8 1
Page 100 and 101:
Page 102 and 103:
2 3 4 5 6 7 8 1 Dimension Drawings
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
References /PFK7/ Planning Guide, A
Page 124 and 125:
References 1FT5/A-124 Space for you
Page 126 and 127:
Index Index-126 Space for your note
Page 129 and 130:
SIMODRIVE Advertising brochure SIMO
show all

Planning Guide AC Servomotors 1FT5 - Siemens Automation and ...

Create successful ePaper yourself

Delete template?

Save as template?