Addendum to PAL User Manual Installation and ... - PAL System

A. Safety Information
Declaration of Conformity
Addendum to PAL System User Manual
PAL ITEX-2 Option
See the Declaration of Conformity sheet enclosed with the instrument.
General Considerations
Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could nullify the user’s authority to operate
the equipment. The user should be aware that if the equipment is used in a
manner not specified by the manufacturer, the protective and safety features
of the equipment may be impaired.
Electrical Hazard
Every analytical instrument features specific hazards. Be sure to read and
comply with the precautions as described in the corresponding PAL User
Manual.
Use only fuses of the type and current rating specified. Do not use repaired
fuses and do not short-circuit the fuse holder.
Other Hazards
To avoid injury during PAL System operation, keep hands away from the
syringe.
Safety Warning:
Do not touch the surface of the Trap Heater during operation. The surface
temperature can reach a potentially harmful level when operated at a high
desorbing or cleaning temperatures.
The Trap surface can reach approximately 270 °C if operated at the maximum
trap temperature of 350 °C.
For detailed Safety Information, see the additional warnings in the
corresponding PAL User Manual.
2