Addendum to PAL User Manual Installation and ... - PAL System

3. PAL ITEX Option Spare Parts
3.1. PAL ITEX-2 Option Spare Parts
Addendum to PAL System User Manual
PAL ITEX-2 Option
Part No. Description
SyrC ITEX-2-1.3 ITEX-2 Syringe 1.3 mL with Adapter M7x0.5
ITEX-2 PLG1.3 Replacement Plunger for ITEX-2 Syringe
MSH 05-01 ITEX-2 Syringe Heater Unit
ITEX-2 HT ITEX-2 Trap Heating Unit
ITEX-2 TrapTXTA ITEX-2 Trap Tenax TA 80/100 mesh
ITEX-2 TrapTXTA-3 ITEX-2 Trap Tenax TA 80/100 mesh, set of 3 pcs.
Table 11. ITEX-2 Option Spare Parts.
3.2 PAL ITEX Option Spare Parts
Parts for the first generation ITEX are NOT compatible with the ITEX-2 Option.
The Trap needle for the ITEX Option has an outer diameter of 2.0 mm at the
top and the ITEX-2 trap has an outer diameter of 3.2. Therefore, the Trap
Heater Unit is not interchangeable.
The Syringe Heater Unit for ITEX-2 is shorter because the syringe has a
volume of 1.3 mL compared to 2.5 mL from the older ITEX Option.
Use the order information as shown below for the first generation ITEX
Option spare parts.
Part No. Description
SyrC ITEX2.5 ITEX Syringe 2.5 mL
with Adapter ¼”-28 UNF Fitting
PLG G2500 Replacement Plunger for ITEX Syringe 2.5 mL
MSH 02-00 Syringe Heater Unit for 2.5 mL HS Syringe
ITEX HT ITEX Trap Heating Unit
ITEX Trap TXTA ITEX Trap Tenax TA 80/100 mesh
ITEX TrapTXTA-3 ITEX Trap Tenax TA 80/100 mesh, set of 3 pcs.
Table 12. ITEX Option Spare Parts.
46