TMS DORMA - Quadri Sistemas

TMS, GB
Specification text Order No. b
DORMA TL-S TMS
Control and interface PCB for installation in TL-G 3xx/5xx
TMS or TL-G 3xx/5xx.
Designed for connection of max. four TV 1xx DCW ® electrical
door locking elements and ST 3x DCW ® key switches,
DCW ® I/O modules, SVP-S 2x DCW ® plus further DCW ® bus
devices. Suitable for connection to a hazard alert system
and/or fire alarm system or smoke detector (RM) for emergency
unlocking via floating contact.
DCW ® system bus with automatic device detection and default
parameterisation of all DCW ® system components; customerspecific
requirements programmable via parameterisation
keypad AT 01 DCW ® or TMS-Soft parameterisation software.
Integrated short-time, long-time and permanent unlocking via
key-operated momentary contact device with programmable
with parameterisable key operating times and functions.
Following power failure, immediate locking action.
Integrated timer with two time zones per day, adjustable via
TMS-Soft. Integrated access control with AT 01 DCW ® pin
code keypad.
Automatic re-locking following authorised unlocking, effected
after between 3 and 180 seconds via short-time timer,
or 3–120 minutes via long-time timer, programmable with
parameterisation keypad AT 01 DCW ® or TMS-Soft parameterisation
software.
Door-open monitoring begins on expiry of the time set in the
timers.
Door-open alarm signal can be delayed from 5 to 180 seconds.
Programmable duration of pre-alarm and main alarm.
Programmable premature re-locking via door contact after
door closure with automatic re-locking mode activated.
Differentiated audible alarm for door-open time exceeded
(pre- and/or main alarm), sabotage/tamper attempt, emergency-open
and fire alarm signals, with local alarm indication
and automatic local alarm cancellation after 180 seconds.
Integrated differential bus cables (monitored for short
circuit/interruption).
Functionality of the integrated key switch and also the
external key switch ST 3x DCW ® adjustable and definable.
Prepared for connection via LON and RS 232 interface to
BUS or conventional systems such as integrated building
management controls and additional control and signalling
devices. Disabling inputs and logic function gating plus
control and actuation of various systems (e.g.: automatic
operators, access control system, etc.) via up to four
DCW ® I/O modules.
Power supply: 24V DC, +/– 10 %
Current input, max.: approx. 65 mA
approx. 90 mA in alarm mode
Contact rating: 24V DC, 0.5 A inductive
24 V DC, 1.0 A ohmic 56330100 b TL-S TMS
DORMA TL-S DCW`
Terminal interface board for installation in TL-G 3xx/5xx and
connection to control types TL TMS or RZ TMS via DORMA
system bus DCW ® . Up to 4 TL-S DCW ® boards can be
connected via the system bus. Parameters such as adjustable
and restrictable functions of the integrated key switch,
the TL-S TMS or RZ TMS are automatically transferred.
Power supply: 24V DC, +/– 10 %
via DCW ® system bus
Current input, max.: approx. 65 mA
approx. 85 mA in alarm mode 56330200 b TL-S DCW`
11