TMS DORMA - Quadri Sistemas

TMS, GB
Specification text Order No. b
DORMA RZ TMS
Emergency exit control PCB in plastics enclosure, IP 54, with
cover contacts including power supply PCB type DORMA NT-S
24-1.5, I/O module and DCW ® branching module. Prepared
for installation of motor lock control type DORMA SVP-S22 or
SVP-S22 DCW ® and further I/O modules.
Designed for the connection of up to 4 TL-G 3xx/5xx DCW ® or
TL-UP S55, door locking elements TV 1xx DCW ® , 2xx DCW ®
or 5xx DCW ® , and key switches type ST 3x DCW ® as well as
further DCW ® bus devices. Suitable for connection of a hazard
warning alarm and/or fire alarm and control unit or RM smoke
detector for emergency unlocking via floating contact or
I/O module.
DCW ® system bus with device auto-identification; default
parameterisation of all DCW ® system components and
customer-specific requirements programmable via parameterising
keyboard AT 01 DCW ® or parameterising software
TMS-Soft.
Integrated programmable short-time or long-time and
permanent unlocking via key-operated momentary contact
device (e.g. TL-G 3xx/5xx DCW ® , TL-UP S55 or ST key switch)
with parameterisable key actuation times and functions.
Instant re-locking on power failure. Automatic re-locking
function after authorised unlocking programmable for 3–180
seconds via short timer or 3–120 minutes via long timer with
parameterisation keyboard AT 01 DCW ® or parameterisation
software TMS-Soft. After timer expiry, door-open monitoring
mode begins. Door open alarm delay adjustable 5–180 seconds.
Duration of pre-alarm and main alarm programmable. After
door closure with automatic re-locking mode active, premature
re-locking can be programmed for activation by door contact.
Differentiated audible alarm to indicate excedence of door
open time (pre-alarm and/or main alarm), tamper attempt,
abuse attempt, emergency open and fire alarm with local
alarm; with automatic local alarm shutdown after 180 seconds
at door terminal. Integrated differential bus cables (monitored
for short circuit/cable break). Functions of the external keyoperated
momentary contact device, e.g. TL-G 3xx/5xx DCW ® ,
TL-UP S55 or ST32 DCW ® can be adjusted and restricted as
required.
DORMA DCW ® I/O module for connection of products with
conventional cabling to the DORMA DCW ® system bus,
e.g.: connection of a TG/TE monitoring and control unit, BL
flashing lamp, AS external alarm siren, or access control
system by others. Four opto-coupler inputs for transmission of
external signals and control commands, e.g. disabling input
for intruder alarm system (floating or non-floating) and four
floating outputs for activation of external components or
for output of signals. Up to four DCW ® I/O modules per TMS
possible.
Addresses pre-parameterised for various requirements.
Individual requirements can be accommodated by programming
using the parameterisation keyboard AT 01 DCW ® or parameterisation
software TMS-Soft (e.g. switch-on delay, monoflop
function, flashing mode, logic/gating operations, etc.).
Power supply: 230V AC, +/– 10 %
Dimensions (W x H x D) approx.: 300 x 230 x 85 mm 56331100 b RZ TMS
NT-S 24-1.5
15