Innovations 2012

Tilting adaptor +/–45°
for command panels with support arm
connection Ø 130 mm
For mounting between:
� Coupling, system 60, CP 6206.300
� Coupling, system 120, CP 6212.300
or
� Attachment, system 60, CP 6206.320
� Attachment, system 120, CP 6212.320
or
� Angle coupling 90°, system 60, CP 6206.380
� Angle coupling 90°, system 120, CP 6212.380
and the command panel
Tilt angle:
Adjustable in 7.5° increments
Material:
− Tilting adaptor: Cast aluminium
− Concertina section: Plastic
Colour:
RAL 7035
Supply includes:
− Seals
− Concertina section
− Assembly parts
Tilting adaptor +100°/–60°
for command panels with support arm
connection 120 x 65 mm
For mounting on:
� IW worktop, prepared for enclosure attachment
Ø 130 mm
� Surfaces
� Attachment/coupling with support arm connection
120 x 65 mm
To fit enclosures up to 20 kg with support arm
connection
� 90 x 71 mm
� Ø 130 mm
� 120 x 65 mm
� VESA Standard 75
With cable tube for protected cable entry.
Tilt angle:
Adjustable in 7.2° increments via clamping lever
and may be limited to +100°/–15° using the stop
screw supplied loose.
Material:
− Tilting adaptor: Sheet steel, spray-finished
− Concertina section: Plastic
Colour:
RAL 7035
Supply includes:
− Concertina section
− Assembly parts
Rittal Innovations 2012
Support arm system 60/120/180
Weight
kg
Model No. CP
1.2 6206.420
Detailed drawings:
Available on the Internet.
Weight
kg
Model No. CP
0.8 6206.460
Detailed drawings:
Available on the Internet.
47