Innovations 2012

NH slimline fuse-switch
disconnector modules
(100/185 mm)
For NH slimline fuse-switch disconnectors,
sizes 00 to 3.
Colour:
RAL 7035
For NH slimline fuseswitch
disconnectors Description
SV 9346.020
SV 9346.030
SV 9346.065
SV 9346.040
SV 9346.050
SV 9346.110/.115
SV 9346.210/.215
SV 9346.310/.315
1) 1 WU 250 mm
2) 1 U 150 mm
Rittal Innovations 2012
100 mm module,
3-pole,
max. 3 x NH size 00
100 mm module,
3-pole,
max. 6 x NH size 00
100 mm module,
3-pole,
max. 10 x NH size 00
185 mm module,
3-pole,
max. 8 x NH size 00/
4 x NH size 1, 2, 3
185 mm module,
3-pole,
max. 12 x NH size 00/
6 x NH size 1, 2, 3
Meter mounting board module
� Open module for internal measurements
� Clearance depth available for meter installation
170 mm
Colour:
RAL 7035
ISV distribution enclosures
Installation modules
Note:
− Busbars are not included with the supply
− In order to ensure problem-free cable connection,
a contact hazard protection module
(see page 82) or an N/PE busbar module
(see page 84) must be installed above or below
the NH slimline fuse-switch disconnector
modules
Size Packs
Width unit (WU) of
1) Height unit (U) 2)
Model No.
SV
1 250 mm 3 450 mm 1 9666.570
2 500 mm 3 450 mm 1 9666.580
3 750 mm 3 450 mm 1 9666.583
2 500 mm 5 750 mm 1 9666.550
3 750 mm 5 750 mm 1 9666.560
Note:
− The meter mounting board module does not
comply with meter mounting board standard
DIN 43 870/VDE 0603 and does not meet the
conditions for total insulation. Use in unmetered
areas only by arrangement with the local
electricity supply company
− 1 contact hazard protection module or support
rail module with 1 WU and at least 1 U is
required both above and below the module,
see page 82
Description
Size
Width unit (WU)
Packs
of
Model No.
SV
1) Height unit (U) 2)
Meter mounting board module 1 250 mm 3 450 mm 1 9666.640
1) 1 WU 250 mm
2) 1 U 150 mm
85