Innovations 2012

CUPONAL busbars
To DIN EN 13 601.
Length: 2400 mm/bar.
Copper-coated aluminium busbars, suitable for
the configuration of busbar systems with busbar
supports SV 9340.000/SV 9340.050,
see Catalogue 33, page 276.
� Handle in the same way as copper bars
� Material cost savings plus lower price fluctuations
thanks to the reduced copper portion
� Weight saving compared with copper bars
Material:
Aluminium core with crimped copper coating
made from E-Cu
Twin cords
for OM adaptors
with tension spring clamp 2.5 – 16 mm2 Pre-assembled connection cables for individual
connection of up to two switchgear units per
adaptor.
Cable length (L):
L1 = 140 mm,
L2 = 250 mm.
Material:
− PVC insulation
− Temperature resistant to 105 °C
− Wire ends with ultrasonic wire-end compression
at both ends
Rittal Innovations 2012
Dimensions
mm
RiLine/Ri4Power
Rated current 1) Packs of
Accessories
Model No.
SV
20 x 5 235 A 6 3582.020
20 x 10 363 A 3 3585.020
30 x 5 328 A 6 3584.020
30 x 10 493 A 3 3586.020
1) Current carrying capacity at 65 °C bar temperature
and 35 °C ambient temperature, correction factor
diagram to DIN 43 671.
70
65
60
55
50
45
40
35
30
25
20
200 250 300 350 400 450 500
CUPONAL busbars
mm
Busbar support Curve
30 x 5/10 9340.000/.050 a
20 x 5/10 9340.000/.050 b
a
b
Ip peak short-circuit current [kA] Short-circuit resistance diagrams
Busbar support spacing [mm]
Design Packs of Model No. SV
AWG 8 =
8.37 mm2 10 mm2 6 9340.830
AWG = American Wire Gauges
75