Innovations 2012

ISV distribution enclosures
Installation modules
Busbar modules N/PE
� For attaching the busbars for N and PE
� Cover is prepared for a lead seal
Colour:
RAL 7035
For
Busbars 12 x 5 to 30 x 10 mm
1) 1 WU 250 mm
2) 1 U 150 mm
Busbar modules
� 3-pole, 60 mm bar centre distance
� For assembling bus-mating fuse components
E18, E27, E33 and D-Switch as well as
NH disconnectors sizes 000 and 00
Colour:
RAL 7035
Description
Busbar module
60 mm
Note:
− Copper or CUPONAL busbars should be
ordered separately, see page 75/76
− Not for use in mounting kit AE
Size Packs
Width unit (WU) of
1) Height unit (U) 2)
Model No.
SV
1 250 mm 2 300 mm 1 9666.590
2 500 mm 2 300 mm 1 9666.600
3 750 mm 2 300 mm 1 9666.603
Note:
− The busbars must be cut to length prior to
installation, depending on the configuration and
connection versions being used, as per the
assembly instructions
− For sealing unwanted cut-outs, blanking cover
SV 9666.660 should be used
84 Rittal Innovations 2012
Size
Width unit (WU) 1) Height unit (U) 2)
To fit
Packs
of
Model No.
SV
1 250 mm 2 300 mm
SV 9343.0003) SV 9343.0203) SV 9343.0403) SV 3418.010
SV 3427.010
1 9666.520
2 500 mm 2 300 mm
SV 3433.010
SV 9340.950 1 9666.530
3 750 mm 2 300 mm
– SV 3431.020
SV 3431.030
1 9666.533
1) 1 WU 250 mm
2) 1 U 150 mm
3) A depth extension frame SV 9666.680 should additionally be used to ensure unrestricted connection.
NH bus-mounting fuse-switch disconnectors size 00 cannot be used in conjunction with other equipment.