Basic Drafting Standards - Interior Design - University of Minnesota

Recommendations

Info

Check list for interior elevation drawings. Please use these as a guide where applicable. 1. Border and title block 2. Title and scale of the drawing in the title block 3. Drawing number in the title block 4. All doors, windows, and frames with proper elevation symbols. 5. All vertical components of the space for all items shown on the plan view including appliances, equipment, and artworks. 6. Door/window/cabinet door opening devices such as door knobs. 7. Angled dash lines near the midpoints of the door/window/cabinetry to indicate the hinge location and door swing. 8. Notations. 9. Dimensions. 10. Title and scale of the elevation under the plan view. Notations 1. Draw cross-reference symbols such as section or detail symbols (Figure 40). 2. Label room names. 3. Label major elements including fireplace, furniture, and shelves. 4. Call out appliances and equipment including refrigerator, dishwasher, clothes washer, dryer, microwave oven, and other similar items. 5. Call out small items such as medicine cabinet, grab bars, towel dispensers, mirrors, base board, molding, and chair rail. 6. Show proper symbolic representation for each material. 7. Call out finish materials. 40
SCHEDULED LIGHTING FIXUR PLASTICS LAM. BASE ETCHED GLASS Figure 40. Section and detail symbols shown on an elevation drawing POLISHED CHROMED CIRCLE - SEE SECTION DRAWING FOR DETAILS 41
Page 2 and 3: Fall Quarter 2008 Department of Des
Page 4 and 5: Drawing is considered to be a unive
Page 6 and 7: Technical Sketch Like an artist may
Page 8 and 9: DRAFTING MEDIA The papers and films
Page 10 and 11: LINE WEIGHTS Line weight and line q
Page 12 and 13: ● Medium Lines (HB pencil lead in
Page 14 and 15: Architectural drawings are intended
Page 16 and 17: Break Lines Break lines are used wh
Page 18 and 19: ARCHITECTURAL GRAPHIC SYMBOLS Wall
Page 20 and 21: Elevation Symbol Figure 13. Section
Page 22 and 23: Figure 19. Detail symbol used on th
Page 24 and 25: Figure 24. Door and window symbols
Page 26 and 27: THE TITLE BLOCK THE TITLE BLOCK TYP
Page 28 and 29: other important upper part of the w
Page 30 and 31: Notations 1. Indicate floor level c
Page 32 and 33: Dimensioning angled objects Figure
Page 34 and 35: Dimensioning curved objects The imp
Page 36 and 37: -Dimensioning concrete/ masonry bui
Page 38 and 39: Figure 35. Drawing an elevation dra
Page 42 and 43: Dimensions A. Interior Elevation 1.
Page 44 and 45: SECTION DRAWINGS A section drawing
Page 46 and 47: Check list for section drawings. Pl
Page 48 and 49: SCHEDULES Figure 46. Detail drawing
Page 50 and 51: 1 2 3 4 Figure 49. A typical graphi
Page 52 and 53: Window Schedule Window schedules ar
Page 54 and 55: Interior Finish Schedule An interio
Page 56 and 57: Furnishing, Furniture, and Equipmen

Basic Drafting Standards - Interior Design - University of Minnesota

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?