Components and solutions for photovoltaic systems - Weidmüller

Modular PE terminals
Identical profiles from 2.5 to 10 mm² with uniform
end and partition plates. An unsurpassed
combination of many advantages!
Their small size compared to the respective rated
cross-section makes the modular terminals with
the compact design very popular.
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS35x7.5 mm
max. cond. cross-section mm²
Max. clamping range mm²
Technical data
Rated data
Rated cross-section mm²
Rated voltage to adjacent terminal V
Rated impulse withstand voltage to adjacent terminal kV
Short-time withstand current
Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded mm²
flexible / Stranded wire with end ferrules mm²
Tightening torque range (clamping screw)
Tightening torque range (fixing screw)
Stripping length / Blade size mm/-
Note
Ordering data
Version
Note
Accessories
End plate / partition
End bracket
Screwdriver
green/yellow Wemid
Dark beige Wemid
Dark beige Wemid
Dark beige Wemid
Marking systems
Marking tags
For detailed information of the further accessories and
applications, please see our terminal catalogue
102
Standard
WPE 16 16 mm²
11.9 x 56 x 63
25
1.5...25
IEC 60947-7-2 Ex e II T II 2 G D
IEC UL CSA EN 60079-7
16
1,000
8
AWG 14...4 AWG 14...6 16
1920 A (16 mm²)
3
B7 / V-0
? r u # i ~ x a
Rated connection
1.5...16 / 1.5...25
1.5...25 / 1.5...16
2.0...4.0 Nm (M 5)
3.0...4.0 Nm
16 / 1.0 x 5.5 mm
Further connection
For 25mm², the TS 35x15 (steel, 1.5mm thick) should be used. Conductor
connection H07V-..16 and AWG 6 with tightening torque of 2.0-2.4 Nm.
Type Qty Order No.
WPE 16 50 1010400000
Type Width Qty Order No.
WEW 35/1 12 mm 50 1059000000
SD 1.0x5.5x150 1 9008350000
WQB-PEN 16 10 1060200000
DEK 5/5 / WS 12/6,5
Rail support for insulated installation of terminal rail „SH 2“ order no.
0494920000 (10 pcs)
PE
WPE 35 35 mm²
16 x 56 x 63
50
2.5...50
IEC 60947-7-2 Ex e II T II 2 G D
IEC UL CSA EN 60079-7
35
800
8
AWG 12...1 AWG 12...2 35
4200 A (35 mm²)
3
B8 / V-0
? r u # i ~ x a
Rated connection
2.5...16 / 2.5...50
2.5...35 / 2.5...35
4.0...5.0 Nm (M 6)
1.2...2.4 Nm
18 / 6.5 x 1.2 mm
Further connection
The torque is 4.5Nm for 16-50 mm² and AWG 6-2/7 stranded wires. Use TS 35x15
(1.5 mm thick) for 25mm² wires and TS 35x15(2.3mm thick) for 35mm²/50mm².
Type Qty Order No.
WPE 35 25 1010500000
Type Width Qty Order No.
WEW 35/1 12 mm 50 1059000000
SD 1.2x6.5x150 1 9009010000
WQB-PEN 35 10 1060100000
DEK 5/5 / WS 12/6,5
Rail support for insulated installation of terminal rail „SH 2“ order no.
0494920000 (10 pcs)
PE