Components and solutions for photovoltaic systems - Weidmüller

Modular PE terminals
Identical profiles from 2.5 to 10 mm² with uniform
end and partition plates. An unsurpassed
combination of many advantages!
Their small size compared to the respective rated
cross-section makes the modular terminals with
the compact design very popular.
In hazardous area applications, the installation instructions
and the rated data specifications for accessories given in the
technical appendix must be followed.
Width/Length/height with TS35x7.5 mm
max. cond. cross-section mm²
Max. clamping range mm²
Technical data
Rated data
Rated cross-section mm²
Rated voltage to adjacent terminal V
Rated impulse withstand voltage to adjacent terminal kV
Short-time withstand current
Pollution severity
Gauge to IEC 60947-1 / UL94 Flammability class
Approvals
Clamped conductors (H05V/H07V)
solid / stranded mm²
flexible / Stranded wire with end ferrules mm²
Tightening torque range (clamping screw)
Tightening torque range (fixing screw)
Stripping length / Blade size mm/-
Note
Ordering data
Version
Note
Accessories
End plate / partition
End bracket
Screwdriver
Marking systems
Marking tags
For detailed information of the further accessories and
applications, please see our terminal catalogue
104
green/yellow Wemid
Dark beige Wemid
Dark beige Wemid
Dark beige Wemid
Standard
WPE 95N/120N 95 mm²
Compact design
27 x 91 x 90
150
16...150
IEC 60947-7-2 Ex e II T II 2 G D
IEC UL CSA EN 60079-7
95
1,000
8
AWG 4...3/0 AWG 4...4/0 95
11,400 A (95 mm²)
3
B13 / V-0
r { #
Rated connection
16...16 / 16...150
16...120 / 16...95
12...20 Nm (M 10)
2.0...4.0 Nm
27 / S6 (DIN 6911)
Further connection
For 50 - 150 mm², the TS 35x15 (copper, 2.3mm thick) rail should be
used.
Type Qty Order No.
WPE 95N/120N
UL, CSA and ATEX approvals in preparation.
5 1846030000
Type Width Qty Order No.
WEW 35/1 12 mm 50 1059000000
DEK 5/5 / WS 12/6,5
Rail support for insulated installation of terminal rail „SH 2“ order no.
0494920000 (10 pcs)
PE