CR Manual CP L&M en - Creation Willi Geller

More documents

Recommendations

Info

CEMENTING ALL-CERAMIC PRESSED CROWNS The restoration fabricated from Creation CP Low has to be adhesively cemented! 18 | L O W Pre-treatment of the restoration before bonding (please follow the manufacturer’s instructions): • Carefully sandblast the inside of the crowns with Al 2O 3 (50 μm) and 1 bar of pressure. • Sandblasted surface. • Etch the roughened surface with maximum 10 % hydrofluoric acid for two minutes, according to the manufacturer’s instructions. • Thoroughly remove the acid residues under running water. Then clean with ultrasound or steam blaster. In the dry state, a milky white surface (fluorosilicate crystals) is visible. • Acidify the fluorosilicate crystals with phosphoric acid (39%) for one minute. Then thoroughly clean under running water. • The microretentive surface is ready for adhesive bonding.
19 | M E TA L I N T R O D U C T I O N PRESS OVER METAL The press over metal technique combines in an unique way economic efficiency and aesthetics. This technique offers unlimited possibilities to the technician, perfect ceramic shoulders for crowns as well as for bridges. „Press over metal“ combines the benefits of a metal ceramic with the possibilities of press ceramics. · Cut back technique: For highly aesthetic restorations. · Cut back easy technique: Efficient and even aesthetical with perfect accordance to the Vita ® Classic shade guide. · Staining posteriors: Easy, fast and beautiful.
Page 1 and 2: CREATION WILLI GELLER INTERNATIONAL
Page 3 and 4: 3 I N T R O D U C T I O N Creation
Page 5 and 6: TOOTH PREPARATION 1,5 2,0 1,5 1,5 2
Page 7 and 8: WA X I N G - U P - S TA I N I N G T
Page 9 and 10: INVESTING 9 | LOW & M E TA L Push t
Page 11 and 12: DEVESTING 11 | LOW & M E TA L Mark
Page 13 and 14: STAINING TECHNIQUE 13 | L O W The o
Page 15 and 16: G L A Z E F I R I N G 15 | L O W Sm
Page 17: COLOUR CHART TRANSPARENT PELLETS 2g
Page 21 and 22: C U T B A C K T E C H N I Q U E - M
Page 23 and 24: C U T B A C K T E C H N I Q U E 23
Page 25 and 26: C U T B A C K T E C H N I Q U E - P
Page 27 and 28: C U T B A C K E A S Y T E C H N I Q
Page 29 and 30: STAINING POSTERIORS 1 4 7 29 | M E
Page 31 and 32: C U T B A C K - C O M B I N AT I O
Page 33 and 34: S TA I N I N G P O S T E R I O R -
Page 36: 36 Distributor Creation Willi Gelle

CR Manual CP L&M en - Creation Willi Geller

Create successful ePaper yourself

Delete template?

Save as template?