CR Manual CP L&M en - Creation Willi Geller
CR Manual CP L&M en - Creation Willi Geller
CR Manual CP L&M en - Creation Willi Geller
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C U T B A C K T E C H N I Q U E<br />
23 | M E TA L<br />
WAXING-UP<br />
The model is isolated and th<strong>en</strong> the framework is put on the model<br />
without pressure. According to the technique used you can<br />
either wax-up completely or reduce. The minimum thickness of<br />
the restoration is 0,8 mm.<br />
Important: Check internally for wax, keeping wax free!<br />
SPRUEING<br />
The objekt is sprued directly. The wax wire should be 3 mm in<br />
diameter, 5 – 7 mm long and should not taper towards the pattern.<br />
The pattern is waxed onto the crucible former in a c<strong>en</strong>tral<br />
position.<br />
P E L L E T<br />
Use a d<strong>en</strong>tine pellet (e.g.: D-A2).