TEA PAM 55-20 Tiedown Handbook for Truck - Military Surface ...

More documents

Recommendations

Info

FOURTH EDITION SDDCTEA PAMPHLET 55-20 The M3 and M3A1 CG location is located 111 inches centered from the front edge of the flatrack as shown in Figure 59b. Figure 59 b. M3 and M3A1 with CG location The operator's manuals, TM 9-2320-364-10 (M1074/M1075 Truck), TM 9-3990- 206-14&P (M1077 and M1 Flatrack), and TM 9-3990-260-14&P (M3 and M3A1 Flatrack)show how to prepare the flatracks to transport cargo and load them on the trucks. Users should refer to the operator's manuals for additional information on the PLS. Flatracks are made by different manufacturers and have different configurations. The data plate on the flatrack gives specific information about its weight, cargo capacity, and tiedown fittings. Features which are common on all flatracks are: 1. The front end is the end with the load handling mechanism bail bar. 2. Cargo tiedown rings are spaced around the edge of the flatrack. The large rings have a capacity of 25,000 pounds. The smaller rings have a capacity of 10,000 pounds, figure 60. 3. All cargo rings will accept hooks, chains, and loadbinders having a 3/4-inch hook opening. All will accept metal banding up to 2 inches wide. 76
FOURTH EDITION SDDCTEA PAMPHLET 55-20 Figure 60. Palletized load system M1077 flatrack. 77
Page 1 and 2:
Tiedown Handbook for Truck Movement
Page 3 and 4:
FOURTH EDITION SDDCTEA PAMPHLET 55-
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: FOURTH EDITION SDDCTEA PAMPHLET 55-
Page 89: FOURTH EDITION SDDCTEA PAMPHLET 55-
show all

TEA PAM 55-20 Tiedown Handbook for Truck - Military Surface ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?