Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tech Note: Real-time clock with <strong>SLS</strong>-<strong>500</strong>-Configurator<br />
Products:<br />
Revision: R100<br />
For all <strong>SLS</strong>-<strong>500</strong> Main Controllers and all <strong>SLS</strong>-<strong>500</strong>-Configurator versions<br />
Set time to PC-time<br />
<strong>SLS</strong>-<strong>500</strong>-Configurator is also able to set the RTC to<br />
the current PC-time.<br />
Set the time by clicking „Set Clock to PC time“. The<br />
current time of the PLC will be loaded to the PLC.<br />
HIQUEL ® GmbH Bairisch Kölldorf 266, A - 8344 Bad Gleichenberg<br />
Tel: +43-3159-3001, Fax: +43-3159-30014, e-mail: hiquel@hiquel.com http: www.hiquel.com<br />
Set time in a running program<br />
<strong>SLS</strong>-<strong>500</strong>-Configurator can also change the time with<br />
a program running on a controller.<br />
The text variable which contains the valid date/time<br />
value has the following <strong>for</strong>mat:<br />
„WD TT.MM.JJ HH:MM:SS“<br />
TU 14.07.03 15:30:00 CLOCK<br />
This constant has to be <strong>connected</strong> with a system textmemory<br />
which has to be set to „CLOCK“.<br />
Consequently the internal real-time clock will be set to<br />
the value of the text-constant or text-variable.<br />
IMPORTANT: The integrated real-time clock runs in<br />
24h mode from 00 to 23 o‘clock!