Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
Searching for connected SLS-500 PLCs - Hiquel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tech Note: Adjust baud rate of the <strong>SLS</strong>-<strong>500</strong> <strong>PLCs</strong><br />
Products:<br />
Revision: R100<br />
Adjust baud rate<br />
You can adjust the <strong>SLS</strong>-<strong>500</strong> Controller to the<br />
following baud rates:<br />
� 9600 Baud<br />
� No parity<br />
� 8 Data bits<br />
� 1 Stop bit<br />
or<br />
� 19200 Baud<br />
� No parity<br />
� 8 Data bits<br />
� 1 Stop bit<br />
or<br />
� 38400 Baud<br />
� No parity<br />
� 8 Data bits<br />
� 1 Stop bit<br />
For all <strong>SLS</strong>-<strong>500</strong> Main Controllers and all <strong>SLS</strong>-<strong>500</strong>-Configurator versions<br />
HIQUEL ® GmbH Bairisch Kölldorf 266, A - 8344 Bad Gleichenberg<br />
Tel: +43-3159-3001, Fax: +43-3159-30014, e-mail: hiquel@hiquel.com http: www.hiquel.com<br />
The adjustment of the baud rate is required <strong>for</strong>:<br />
�Communication between module and PC<br />
�Communication between module and<br />
external devices, which provides different<br />
baud rates<br />
�Copy program from internal memory<br />
to the MemoryCard<br />
�Copy program from MemoryCard<br />
to internal memory