SHOWPIX User Manual - High End Systems

CHAPTER 3
SHOWPIX® Menu System
Data Loss Timeout
Use this menu option to determine how the fixture will react in the event of DMX data loss. Set
the output to remain on until shutdown or to black out one second after data loss.
To set the DATA LOSS TIMEOUT:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to SET
PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Center button, scroll to DATA LOSS TIMEOUT.
4. Using the up and down arrows on the Center button, choose LONG to keep the output active
until shutdown, or SHORT to black out the fixture 1 second after data loss and press the
Enter button to select.
Display Level
Use this menu option to Dim the display when the menu is locked.
To set the DISPLAY LEVEL:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to SET
PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Center button, scroll to DISPLAY.
4. Using the up and down arrows on the Center button, choose OFF to dim the display or ON to
turn the display on and press the Enter button to select.
24 SHOWPIX® Pixelation Luminaire User Manual