SHOWPIX User Manual - High End Systems
SHOWPIX User Manual - High End Systems
SHOWPIX User Manual - High End Systems
- TAGS
- showpix
- manual
- www.highend.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHAPTER 3<br />
<strong>SHOWPIX</strong>® Menu System<br />
Test Options Menu<br />
Homing the Fixture<br />
The <strong>SHOWPIX</strong> fixture automatically homes all its functions whenever it is turned on. To<br />
manually home the fixture:<br />
1. Press the Menu button to unlock the menu system or to move back up the system to the<br />
top level menus.<br />
2. Use the left and right arrows on the Center button to scroll to the<br />
TEST OPTIONS MENU and press the Enter button to select.<br />
3. Use the left and right arrows on the Center button to scroll to HOME FIXTURE.<br />
4. Press the Enter button to store the selection. The fixture will begin homing.<br />
Copying the Boot Code<br />
When new software is uploaded to <strong>SHOWPIX</strong> fixtures, it may contain a new boot code which<br />
must be copied to each fixture. This is apparent if the fixture displays a BOOTDIFF error.<br />
CAUTION:<br />
Do not remove power from the fixture while performing a boot copy.<br />
To accept and store the new boot code:<br />
1. Press the Menu button to unlock the menu system or to move back up the system to the<br />
top level menus.<br />
2. Using the left and right arrows on the Center button, scroll to the<br />
TEST OPTIONS MENU and press the Enter button to select.<br />
3. Using the left and right arrows on the Center button, scroll to the COPY BOOT option and<br />
press the Enter button to select.<br />
4. Use the up and down arrows on the Center button to scroll to the YES option and then press<br />
the Enter button to store the command. The fixture will store the new boot code, then<br />
automatically home.<br />
Self Test<br />
These options let you test pan and tilt functionality as well as the Graphic Engine control of LED<br />
color and operation.<br />
Display Test<br />
This option tests the functionality of the Menu Display screen.<br />
Encoder Disable<br />
This option lets you disable the encoders to prevent their function from interfering with manual<br />
rotation of the head.<br />
Code Menu<br />
This is a diagnostic option reserved for factory use.<br />
26 <strong>SHOWPIX</strong>® Pixelation Luminaire <strong>User</strong> <strong>Manual</strong>