You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Specification sheet<br />
Hempel (Denmark) A/S<br />
Project:<br />
Area:<br />
BALLAST TANKS BELOW SAUNA AND LAUNDRY<br />
Remarks:<br />
DANA - DOKNING 2010 Obj. ref.: 7912680<br />
The surface must be completely clean and dry with a temperature 3°C/5°F above the dew point to avoid condensation.<br />
At the freezing point be aware of ice on the surface.<br />
The specified high film thickness can best be obtained by airless spray application. If another application method is used more applications are necessary to achieve the specified dry<br />
film thickness.<br />
Curing agent 97334 is hazy. This is intended and has no influence on the performance.<br />
With this ballast tank coating system it is especially important that the specified film thickness is achieved all over and that a uniform film formation free of any pinholes and other<br />
defects is obtained for each coat applied.<br />
Stripe coating with brush before or after spray application of each coat is to be carried out on areas difficult to cover properly by spray such as edges, corners, flanges, cutouts,<br />
handwelds and other rough surfaces. IMO MSC.215(82) accepts roller application on scallops, ratholes, etc. only.<br />
If the maximum recoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion.<br />
In confined spaces provide adequate ventilation during application and drying.<br />
Before taking tank into use, allow paint film to dry and cure completely (including several days by strong ventilation).<br />
Product information:<br />
Mixing ratio Pot life Dry to touch Flash<br />
Application restrictions<br />
Shade no.<br />
Volume<br />
solids %<br />
Curing<br />
agent<br />
volume<br />
20°C 20°C<br />
point<br />
°C<br />
VOC<br />
g/ltr MAL Thinner<br />
Min. Temp. Max. RH%<br />
°C<br />
HEMPADUR QUATTRO 17634 50630 72 97334 4 : 1 2 h 4 h 27 275 4-5 08450 -10<br />
HEMPADUR QUATTRO 17634 22090 72 97334 4 : 1 2 h 4 h 27 270 4-5 08450 -10<br />
The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or specifically defined conditions and said Information is correct to the<br />
best of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do not<br />
guarantee the accuracy, completeness or appropriateness of the Information when the Product is used in those conditions. The provisions of Clause 8 of the GENERAL CONDITIONS OF SALE, DELIVERY AND SERVICE shall apply to any and<br />
all claims arising out of or in connection with the use of the Product as recommended above, overleaf or otherwise.<br />
Hempel's PreSale System 2.6.16 (Build 673)<br />
User name:<br />
Henrik Berg<br />
Quality Code: 34-11 / 0710<br />
<strong>HEMPEL</strong><br />
Printed at: 21.07.2010 11:35 Department name: Sales Denmark Environment : Immersion<br />
Created/Last modified: 21.07.2010 11:29 DKHEJ0181 Page: 14
Change language