You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Area:<br />
AFT DECK<br />
Remarks:<br />
Specification sheet<br />
Hempel (Denmark) A/S<br />
Project:<br />
DANA - DOKNING 2010<br />
Obj. ref.: 7912680<br />
Area size:<br />
300 sqm<br />
The surface must be completely clean and dry with a temperature 3°C/5°F above the dew point to avoid condensation.<br />
If a full blasting is desired, note that the primer coats are to be applied as full coats.<br />
The specified high film thickness can best be obtained by airless spray application. If another application method is used more applications are necessary to achieve the specified dry<br />
film thickness.<br />
Pit-corroded areas may call for an extra coat to fill out pittings.<br />
If the maximum recoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion.<br />
Before recoating after exposure in contaminated environments, clean the surface thoroughly by (high pressure) fresh water hosing and allow to dry.<br />
Product information:<br />
Mixing ratio Pot life Dry to touch Flash<br />
Application restrictions<br />
Shade no.<br />
Volume<br />
solids %<br />
Curing<br />
agent<br />
volume<br />
20°C 20°C<br />
point<br />
°C<br />
VOC<br />
g/ltr MAL Thinner<br />
Min. Temp. Max. RH%<br />
°C<br />
<strong>HEMPEL</strong>'S ZINC PRIMER 16490 19840 33 30 min 7 590 08450 4-3<br />
HEMPATEX HI-BUILD 46410 50630 42 4 h 24 513 08080 4-5<br />
HEMPATEX HI-BUILD 46410 40640 43 4 h 24 507 08080 4-5<br />
HEMPATEX ENAMEL 56360 40640 30 3 h 25 607 08080 4-3<br />
The data, specifications, directions and recommendations (hereinafter "Information") given in this painting specification are based upon test results obtained under controlled or specifically defined conditions and said Information is correct to the<br />
best of our knowledge. The User must satisfy itself that it is appropriate to use the Product in accordance with the Information in the actual conditions under which the Product is intended to be used, and the Manufacturer and Seller do not<br />
guarantee the accuracy, completeness or appropriateness of the Information when the Product is used in those conditions. The provisions of Clause 8 of the GENERAL CONDITIONS OF SALE, DELIVERY AND SERVICE shall apply to any and<br />
all claims arising out of or in connection with the use of the Product as recommended above, overleaf or otherwise.<br />
Hempel's PreSale System 2.6.16 (Build 673)<br />
User name:<br />
Henrik Berg<br />
Quality Code: 34-11 / 0710<br />
<strong>HEMPEL</strong><br />
Printed at: 21.07.2010 11:35 Department name: Sales Denmark Environment : Medium<br />
Created/Last modified: 21.07.2010 11:29 DKHEJ0181 Page: 20
Change language