Manual - Surveillance System, Security Cameras, and CCTV ...

100
1.16 Picture-and-Picture View
With the Picture and Picture (PAP) view, you can create a split video effect with multiple close-up
views on the image. A total of 7 close-up views can be defined. This function is useful for megapixel
resolution that provides clear, detailed images of the surveillance area.
1. Click the desired camera name on the screen, and select PAP View.
2. The screen automatically switches to one division, and a row of three inset windows appears on
the bottom of the screen.
Figure 1-81
3. Draw a navigation box on the image, and this selected area is immediately reflected in one inset
window. Up to seven navigation boxes can be drawn on the image.
4. To adjust a navigation box size, move the cursor to any of the box corners, enlarge or diminish the
box.
5. To move a navigation box to another area on the image, drag it to that area.
6. To change the frame color of the navigation box, right-click the image, select Mega Pixel Setting
and click Set Color of Focus Area.
7. To hide the navigation box on the image, right-click the image, select Mega Pixel Setting and
click Display Focus Area of PAP Mode.
8. To delete a navigation box, right-click the desired box, select Focus Area of PAP Mode and
select Delete.
9. To exit the PAP view, click the camera name and select PAP View again.
10. To add another navigation box when less than seven navigation boxes are drawn, click the
camera name, select PAP View to enter, right-click the image, select Mega Pixel Setting, and
then select Enable Add-Focus-Area-Mode.