Manual - Surveillance System, Security Cameras, and CCTV ...

8.6.4 Adding a Host
The Multi View allows video streaming from multiple GV-Systems and GV IP devices. Follow the steps
below to create several host accounts for later connection use.
1. Click the Edit Host button (No. 10, Figure 8-34). This dialog box appears.
Figure 8-37 The Edit Host Window
2. All created hosts are forced to be grouped. Click the New button and select Group to create a
group first. Then click the New button again and select Host to create a host.
3. In the Host Name field, type a name to identify the host.
4. Select a device type for the host.
5. Type the IP address or domain name of the host. Type a valid username and password to log into
the host. Modify the default ports if necessary to match the corresponding ports on the host.
6. Click the Save button. The host will appear in the Host List (Figure 8-35) with the given ID name.
8
Remote Viewing
399