Manual - Surveillance System, Security Cameras, and CCTV ...

4. To switch between the mini and normal view, click the Configure button (No.14, Figure 1-2),
point to A/V Setting and select Mini-View Switch.
Figure 1-4 Mini View
[Location Name] The given name (maximum 14 characters) is displayed in main screen as the name
of the server.
[Video Log Storage] Select storage type (recycle or not recycle) and location. See Setting Data
Storage later in this chapter.
1
Configuring Main System
[Caption] Enters heading to have it displayed on the upper left-hand corner of the camera screen. You
may choose No for no heading; ID to show only camera ID; ID+Name to show both camera ID +
Name.
[Send Alerts Approach] Click the arrow button to choose whether to be notified by e-mail, telephone
or SMS when alert conditions occur under the surveillance area.
To send hotline alerts, see Setting Alert Notification in Hotline Notification later in this chapter.
To send e-mail alerts, see Setting Alert Notifications in E-Mail Notification later in this chapter.
To send SMS alerts, see Setting Alert Notifications in Short Message Service in Chapter 10.
[Exit Option] Check the box to enable the feature. Press the blue Arrow button to switch between
Auto Shutdown Windows and Auto Restart Windows. Auto Shutdown Windows closes Windows
OS after exiting GV-System. Auto Restart Windows restarts Windows OS after exiting GV-System.
[PTZ Control] Adds PTZ cameras to the system. See operation details in PTZ Control later in this
chapter.
13