FL900 Series Flow Logger - Hachflow

Figure 6 Attach a sensor to the logger
Figure 7 Attach a sensor to an external module
Attach an external module
An external module must be used as an interface between some sensor types and the logger. The
external module is mounted on the side of the logger (Figure 7 on page 14). Refer to the
documentation that is supplied with the module for mounting instructions.
Attach a sampler
The logger can attach to a Sigma 900 Standard, Sigma 900 Max or Hach SD900 sampler for flowpaced
and set point sampling. The sampler also supplies power to the logger and to attached
14 English