SABO 7 SABO 72-12G - SABO 72-12H - Operator's Manual

ENG 10 UNPACKING AND ASSEMBLY
Push the pin in using a hammer, ensuring that it comes completely through to the
opposite side.
NOTE To avoid damaging the steering wheel with the hammer, use
an awl or a screw-driver of the same size as the pin to push it in the last part.
FITTING THE SEAT
Fit the seat (1) onto the plate (2) using the
screws (3).
CONNECTING THE BATTERY
The battery (1) is situated in a compartment
under the steering wheel and is
reached by removing the plastic cover (2)
held on by two screws (3).
Connect the two red cables (4) to the positive
terminal (+) and the three black
cables (5) to the negative terminal (–)
using the supplied screws and following
the illustrated sequence.
Recharge the battery according to the
manufacturer's instructions.
5
2
3
3
1
3
4
2
1