SABO 7 SABO 72-12G - SABO 72-12H - Operator's Manual

ENG 42 TROUBLESHOOTING
PROBLEM SITUATION LIKELY CAUSE SOLUTIONS
10. Unusual
vibrations while
working
Key in «ON»,
engine running
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
– balance or replace the
damaged blade
– check that the blade is firmly
fitted
– check and tighten all the
fixing screws of engine and
the machine
– remove the grass-catcher,
empty the collector channel
and clean the inside of the
cutting deck
If problems continue after having carried out these operations, contact your
Dealer.
! WARNING!
Do not take on complicated repair work if you don't
have the necessary equipment and the technical knowledge. The guarantee
is automatically revoked and the manufacturer declines all
responsibility for any repairs which are badly done.