SABO 7 SABO 72-12G - SABO 72-12H - Operator's Manual

HOW TO USE THE MACHINE
5. HOW TO USE THE MACHINE
ENG 17
! DANGER! REMEMBER THAT THE USER IS ALWAYS RESPONSIBLE
FOR DAMAGE AND INJURIES TO OTHERS. Before using the machine,
read the safety requirements shown in chapter 2, paying particular attention
to driving and cutting on slopes. It is the user's responsibility to
assess the potential risk of the area where work is to be carried out, as
well as to take all the necessary steps to ensure safe working, particularly
on slopes or rough, slippery and unstable ground. This machine must not
be used on slopes greater than 10°(17%).
! WARNING! If the machine is likely to be used mostly on sloping
ground (max. 10°), fit counterweights (supplied on request) to the front
part of the frame to improve stability at the front and reduce the chance of
tipping up.
IMPORTANT
chapter 4.
All references regarding the positions of controls are shown in
5.1 DIRECTIONS BEFORE STARTING
SEAT ADJUSTMENT
The seat is held by four screws (1) which
have to be loosened for changing the
position of the seat which is done by sliding
it along the slots in the base.
When you have got in a comfortable position,
fully tighten the four screws.
REFUELLING
NOTE
The oil and fuel to use are indicated in the engine booklet.
To reach the oil level dipstick, lift up the seat and open the hatchway beneath.
1
1