introduction - Bose
introduction - Bose
introduction - Bose
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHANGING SOURCE SETTINGS<br />
CHANGING SOURCE SETTINGS<br />
36<br />
Svenska Nederlands Italiano Français Svenska Nederlands Español Français Deutsch Italiano Deutsch Español Dansk English<br />
Dansk<br />
Figure 18<br />
Changing the number of<br />
speakers playing<br />
How to change the settings<br />
In the Settings menu on the media !<br />
center display or on the TV screen, !<br />
move around and make changes!<br />
by using the selection buttons shown.<br />
On the display or the screen, the same actions apply:<br />
• Press the left, right, up, or down arrows to get to the option you want.<br />
• Press Enter or the left arrow to confirm your selection and move back to the features column.<br />
• Repeat these steps for each change you want to make.<br />
• Press Exit to leave the Settings menu.<br />
The progression below shows how to change the number of speakers used when FM plays !<br />
(Figure 18).<br />
A. The FM Settings menu appears on the TV screen with 5 speakers as the default setting.<br />
B. Arrow buttons move right and up or down to change the number of speakers playing.<br />
C. Enter or the left arrow confirms the new setting and moves back to the list of tuner<br />
attributes.<br />
A. B. C.<br />
FM FM<br />
FM<br />
2-3-5 Speakers: 2-3-5 Speakers:<br />
2-3-5 Speakers:<br />
You can use the actions above to restore the original settings, too. Do this if you do not like<br />
the effect of a change you have made, or accidentally made a change you did not intend.<br />
The original (default) settings for each source are shown as the first option for each feature on<br />
the pages that follow.<br />
You can restore all default settings by choosing Restore Settings in the Systems menu, under<br />
F(3;"#6(2+(/. This reverses all changes you have made in both the Settings or System<br />
menus. Instead of making this overall change, you can note the default setting listed on the<br />
pages that follow, then re-select that setting in any of the sources.