CLIMAZON2 - Wella

ENGLISH
1 Description of appliance and functions
1.1 Parts and controls
Please open the foldout page (see page 3).
1 Five heating elements:
- the side arms with the side heating elements can be folded out
- the side heating elements can be put in three different positions
2 Ventilation openings for heating element waste heat
3 Temperature sensor with protection filter in front of the sensor
4 Customer button for reducing the treatment temperature
5 Customer button display:
- Blue = reduced treatment temperature
- Red = standard treatment temperature
6 Control panel (rating plate on underside)
7 Handle
8 ON/OFF switch (power switch)
9 Cable hook for mains cable (only pedestal version)
(the cable hook locks the appliance in the pedestal ST5)
a Mains cable
b Plug
Control panel: programme selection, parameter input and display:
c Pilot lamp (2):
- are continuously lit during operation
- flash 3 minutes before the end of treatment
- flash if a fault occurs
d Function buttons (10):
- Select treatment
- Change settings
e CLEAR button:
- Cancel treatment
- Exit basic settings menu
- Exit submenu
f Display
g SETTING button:
- Select basic settings menu
Pedestal version (not included in scope of supply):
h Pedestal base type ST5 with 3 castors
i Pedestal tube type ST5
Wall version (not included in scope of supply):
j Acrobat 2004 wall arm type WA04/75 or type WA04/95
(extension and spring arm)
k Acrobat 2004 wall bracket type WL04 with plug
l Acrobat 2004 wall stop type AG04/10 or type AG04/30 for wall arm (optional)
46