Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com

More documents

Recommendations

Info

WP01_1_2010_de_en_fr_it_V10.doc 26 / 96 Thank you for choosing our product! Make sure you read the instructions before setting up and starting to use your stove. This prevents damage that could be caused through improper installation or operation. The stove will then work optimally and not harm the environment. WAMSLER Haus und Küchentechnik GmbH wishes you cosy warmth and many relaxing hours with your pellet stove. Index 1 Important Notes 27 2 Dimensioned Drawing, Cable Layout 28 3 System Specifications 29 3.1 Minimum operation times / Integration of an external controller 29 3.2 Room and ambient temperatures / moisture conditions during operation 29 3.3 Chimney connection 29 3.4 Combustion air supply 29 3.5 Pellet quality 30 3.6 Cleaning, servicing and maintenance 30 3.7 Power / voltage supply 30 4 Stove Specifications and Functional Description 31 4.1 Technical data 31 4.2 Delivery contents 31 4.3 Functional description 31 4.4 Operation of stove and heating mode 33 4.5 Pre-selection of heat output 33 4.6 Start-up 33 4.6.1 Hopper feeding 34 4.6.2 Switching on the stove 34 4.7 Control panel 35 4.8 Prior to start / ignition 40 5 Malfunction Analysis, Fault Codes 40 6 Cleaning and Maintenance 41 6.1 Inspection and cleaning of the burn pot 41 6.2 Cleaning of the viewing panel 42 6.3 Cleaning of the surfaces 42 7 Servicing 42 7.1 Cleaning of the fuel gas draught components 43 7.2 Cleaning of the ash collector 44 7.3 Cleaning of the burn pot 44 7.4 Inspection of the air suction pipe 44 7.5 Inspection and cleaning of the electrical components 45 7.6 Completion of servicing, trial run 45 8 Fire Safety Regulations 45 8.1 Furnishing in the radiation range 46 8.2 Furnishing exterior to the radiation area 46 8.3 Floor below and in front of the stove 46 8.4 Objects in the area of the air inlet and circulation openings 46 8.5 Spacing from the connection components (flue pipe) 46 9 Approved Fuels 47 10 Storage of Pellets 47 11 EC Declaration of Conformity 47 12 Customer Service / Spare Parts 48 13 Your Specialised Company 48
WP01_1_2010_de_en_fr_it_V10.doc 27 / 96 1 Important Notes Please read all instruction and information sheets before installing and starting your stove. European and national standards and regulations have to be observed. This will prevent the occurrence of malfunctions and operational failures. Only pellets of 6 mm diameter that are manufactured from natural wood and tested according to DIN-PLUS or Ö-Norm may be used in the WAMSLER Pellet Stove. Other fuels lead to damage of the pellet stove and affect the environment. The European Standards EN 13384, EN 15287 and EN 1856-2 apply to chimneys, flue gas elements and connection components, respectively. In addition, customers in Germany have to observe regulations for firing plants (FeuVO), air circulation heaters, the rules of the electrical and electronic association (VDE) and the first emission control act (1. BImSchV). In Germany, a firing system may be operated only after the responsible master chimney sweep has issued the approval for operation. Contact the responsible person promptly before planning to set up or remodel a heating system. Proper use is explained in what follows. Any other form of use is considered to be improper. We do not assume any liability for eventual damage. Proper use also includes compliance with the instructions for installation and use. Inadmissible operation and modifications of the device lead to annulment of warranty claims. Especially, jobs such as installation, assembly, start-up, servicing and repairs may be performed only by a technically approved company (construction of heaters or air circulation heaters). Claims under warranty as well as warranty claims expire upon improper use. Connection and assembly of electrical devices may be performed only by technically qualified electricians. Electronic components such as printed circuit boards and control panels are sensitive to electrostatic discharge. As part of final acceptance the technically approved company is obliged to thoroughly and competently instruct the device operator on operation, cleaning and maintenance of the stove. These instructions should especially deal with the use of appropriate fuels, cleaning required to be performed at regular intervals by the user, the necessary maintenance and safety regulations. Claims under warranty as well as warranty claims especially expire upon negligence of the instructions as well as the stipulated cleaning and maintenance. Prior to starting you must ensure without fail that all accessories are removed from the firebox and ash collector and the burn pot is free from residue. The cleaning of the heating system must be regularly performed by the user. For the servicing of the heating system we recommend the signing of a service contract between the specialised dealer and the user. Regular servicing can also be performed by a technically well-versed user who is thoroughly instructed by the specialised company. Disconnect the main power plug prior to beginning any work! The main power plug or the associated power point must be easily accessible at all times. Operation of the stove with a damaged power cable is forbidden. If the power cable is damaged, have it replaced immediately by a technically qualified electrician in order to prevent risks. Do not disconnect the main power plug of the stove during operation! Switch off the stove beforehand, wait until the follow-up time of the blower has elapsed (burn off).
Page 1 and 2: WP01_1_2010_de_en_fr_it_V10.doc 1 /
Page 11 and 12: WP01_1_2010_de_en_fr_it_V10.doc 11
Page 25: WP01_1_2010_de_en_fr_it_V10.doc 25
Page 77 and 78:
WP01_1_2010_de_en_fr_it_V10.doc 77
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
show all

Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com

Create successful ePaper yourself

Delete template?

Save as template?