Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com
Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com
Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WP01_1_2010_de_en_fr_it_V10.doc 41 / 96<br />
6 Cleaning and Maintenance<br />
Ash and soot result upon <strong>com</strong>bustion of solid fuels. Thus, regular cleaning has to be<br />
performed by the user to ensure error-free operation.<br />
Caution / danger:<br />
Stoves that are not cleaned according to our specifications may not be operated. All<br />
warranty claims expire upon non-<strong>com</strong>pliance.<br />
The number of required cleaning runs of the burn pot is solely dependent upon the ash<br />
content of the pellets and cannot be modified by adjustments on the stove since ash is<br />
the non-burnable <strong>com</strong>ponents of the pellets!<br />
Thus, we re<strong>com</strong>mend to use only wood pellets with an ash content < 0.5%.<br />
In case of solid fuels, especially the very fine ash of wood pellets, the panel could acquire a<br />
coating of ash, which is either very bright or pitch dark according to the pellet quality and output<br />
setting of the stove (especially in lesser output). This is a natural course upon firing of wood<br />
pellets and does not represent any defect.<br />
Caution!<br />
Prior to the <strong>com</strong>mencement of maintenance, switch off the stove and allow it to cool<br />
down. Please note the safety instructions also in the hopper lid. All <strong>com</strong>ponents in the<br />
firebox could still be hot. Ember is eventually concealed in the ash. Never refill unburned<br />
pellets or ash from the firebox into the hopper – Risk of fire!<br />
6.1 Inspection and cleaning of the burn pot<br />
Check daily - at the latest after a <strong>com</strong>plete filling of the hopper - the burn pot for <strong>com</strong>bustion<br />
residues (ash / slag). The burn pot must be cleaned at the latest upon reaching 30 g ash / slag<br />
(approx. 1 cm thick residue).<br />
Cleaning of the burn pot can be done within a few seconds during operation by scraping the<br />
ash from the burn pot until only very little ember remains. Allow the ash to fall into the ash<br />
<strong>com</strong>partment.<br />
Important note:<br />
• All openings of the burn pot must be left free.<br />
• In order to leave the perforations free for air access, do not<br />
press or gro<strong>und</strong> the ash into the burn pot.<br />
• After each cleaning procedure, check whether the burn pot is<br />
properly fixed to the holder.<br />
Caution: Risk of fire<br />
There is acute danger of fire in case of embers in the ash. Vacuum<br />
only if you are definitely certain of the absence of embers.