Aufstell- und Bedienungsanleitung Pelletofen ... - Pelletshome.com

WP01_1_2010_de_en_fr_it_V10.doc 45 / 96
7.5 Inspection and cleaning of the electrical components
Please check again if the power plug is disconnected. Check the laying of the electric cables
visually. Cables may not be laid across sharp corners or hot places and may not exhibit
cracks / blank points. Replace cables in case of cracks, etc. Clean electrical components with
brush upon strong dust formation and scrape off any corrosion residue from electrical contacts
7.6 Completion of servicing, trial run
After the performance of servicing reconnect all contacts and conduct a trial run.
8 Fire Safety Regulations
All flammable components, furniture or decorative materials, for example, in the
proximity of the stove have to be protected against the influence of heat. Observe in
particular all locally valid fire safety provisions and regulations.
Dimension Value Significance
A 80 cm Minimum spacing to hot air outlets / radiation range
B
40 cm
Minimum spacing to hot air outlets with ventilated radiation screening / radiation
range
C 20 cm Minimum spacing exterior to the radiation range
D
20 cm
Minimum insulation of flue pipe in case of wall insertion with insulation (not backventilated)
Pictures illustrating fire safety spacings
Connection Verbindungsstück component
D
D
C
C
Feuerfester
Fire-proof
Belag
coating
/
/
base plate
Bodenplatte
C
C
B
A
belüfteter Ventilated Strahlungsschutz
radiation screen
30 cm 30 cm
50 cm
Example with chimney connection component within the
fireplace room
Example with chimney connection component inserted
through the wall