Reference Guide

Working with Zend Controller
Initial Setup
Zend Server Reference Manual
The following procedure describes how to configure the Zend Controller's settings to communicate with
Zend Server. This procedure should be completed before using the Zend Controller.
To Set up the Zend Controller:
1. Open the Zend Controller menu (right-click in Windows or Unix, Ctrl-Click in Mac).
2. In the Zend Controller's menu, click to open the Settings dialog.
3. Make sure the following settings are correct:
Hostname - unique name or IP number of the server on which Zend Server is running.
Can be a remote server on the same LAN.
Port - The default ports are:
- Windows: 80 for HTTP
- Unix: 10081 for HTTP and 10082 for HTTPS
If you changed the port of the Web server that runs Zend Server during the installation,
change this value too.
Password - The password is automatically configured when you set your Administration
Interface password.
Connection Scheme - Your preferred method of connecting the Control Panel with Zend
Server for communication purposes, where HTTPS is a secured connection protocol.
109