Reference Guide

Zend Server Reference Manual
84
Replace with the port you are using. The default values are port 80 for
Windows DEB and RPM and port 10088 for the other operating systems unless you
manually changed the port assignment.
Your browser displays the "Hello World" message.
Configure Debugger Access Control
Purpose: To enable PHP debugging using Zend Studio and Zend Server.
Result: You are able to debug your PHP code and view the results in Zend Studio.
Before working with the Debugger, configure the allowed hosts in Server Setup | Debugger.
Note:
By default, Zend Server comes with a permissive setting that allows all standard private IP addresses (for
example 10.*.*.*) to access the Debugger. For security reasons, if you do not have an immediate need for
permissive access, remove these ranges from the Allowed Hosts: 10.*.*.* / 192.168.*.* / 172.16.*.*.
Additional setup information can be found in the Installation Guide, in Package Setup and Control Scripts.