Reference Guide

To Change a Rule
Zend Server Reference Manual
The following procedure describes how to change a rule. By default, all rules are set with predefined
conditions. Each rule has different parameters that can be configured based on what the rule monitors.
See Advanced Diagnostics with Zend Server for more information on the available rule types.
To change a rule:
1. In Rule Management | Monitoring click on a rule.
The rule will open for editing.
2. change the settings according to the rules configuration options.
Each rule has different settings.
3. Define the actions that will be applied to the rule.
If you define an action for an event it will show-up in Rule Management | Monitoring in
the Event Actions column.
4. Click to save.
5. To apply the changes click .
The rule will now start generating Events based on the new settings.
Once you have set actions for an event (tracing and send mail), you can deactivate these actions from
the main page (Rule Management | Monitoring) by selecting a rule or multiple rules from the list and from
the bottom of the page in the drop-down list, choose the applicable option:
Enable Emailing Action
Disable Emailing Action
Enable Code Tracing Action
Disable Code Tracing Action
117