Reference Guide

Profiling
Zend Server Best Practices
Profiling code with Zend Server is the process of using Zend Studio to analyze code execution
performance.
To access this option from Zend Server go to Monitor | Events, select an event from the list and click on
the event's ID number to view the details page.
This procedure describes how to profile an event from inside Zend Server. Profiling from inside an event
provides an additional diagnostics layer in order to investigate why a specific event was triggered.
Before following this procedure make sure that Zend Server and Zend Studio are running and properly
setup.
To Profile an event:
1. Open an event by going to Monitor | Events, selecting an event from the list and
clicking on the event's ID number to view the details page.
2. In the Zend Studio diagnostics area click
This action will run on the server defined in . By default, the settings are
set to run diagnostic actions on the originating server (the server on which the event was
created). You can change the settings to run on a different server.
3. The information will be transferred to the Zend Studio PHP Profile preference where you
can run profile and edit the file.
417